Utilizing the company's vertical
machining center as the foundation, Mori Seiki has created a machine for die and
mold applications, the NVD4000 DCG.NVD4000 DCG Provides Surface Finishes in Die and Mold Applications
Utilizing the company's vertical
machining center as the foundation, Mori Seiki has created a machine for die and
mold applications, the NVD4000 DCG.
"Introduced by Mori Seiki in 2003, DCG (Driven at the Center of Gravity) technology provides optimal finish, making it a natural choice for die and mold manufacturers. The NVD4000 DCG contains features to speed up program processing, make machine movement smoother and help provide higher levels of precision," stated a spokesperson.
In machines using DCG, the net driving force acts through the center of each axis. The NVD4000 DCG contains five ballscrews - two on the Y-axis, two on the Z-axis, and one on the X-axis - that enable a reduction in vibration. The new NVD4000 DCG only incorporates twin ballscrews where they provide benefit, whereas placing dual ballscrews in all three axes can reduce the overall dynamic response of the machine.
The features of the NVD4000 DCG are particularly beneficial to those running die and mold applications. An input increment of 0.1 microns offers improved resolution. To help raise accuracy in constant running applications, all three axes contain direct scale feedback, and dynamic thermal displacement control is provided for the spindle. A DataServer stores large part programs and quickly transfers them to the NC control during cutting.
The NVD4000 DCG's ATC tool-changing-time of 2.8 seconds chip-to-chip, 1.0 seconds tool-to-tool, quickly serves the 27.6" x 17.7" work table. The machine's 40-taper spindle is 12,000 rpm (20,000 rpm optional) and 25 hp (10-min. rating) capable. A center-trough design evacuates chips.
For more information contact:
David Austin
Mori Seiki U.S.A., Inc.
9001 Currency St.
Irving, TX 75063
972-929-8321
Fax: 972-929-8226
Southeast
W. NC, SC
Jack Hasty
J & H Machine Tools, Inc.
4345 Morris Park Drive
Charlotte, NC 28227
704-545-7362
Fax: 704-545-0073
GA, S. AL
Steve Landrum
J & H Machine Tools, Inc.
704-545-7362
Fax: 704-545-1506
VA, MD, DE, E. NC
Jack Hasty
J & H Machine Tools Inc.
c/o Charlotte, NC
704-545-7362
Fax: 704-545-9793
TN, MS, N. AL
Brooke Sykes
J & H Machine Tools, Inc.
7118 Crossroads Blvd.
Brentwood, TN 37027
615-661-6800
Fax: 615-661-6802
FL
Rich Cleary
Maruka USA, Inc.
3000 GulftoBay Blvd #312-313
Clearwater, FL 33759
727-669-8211
Fax: 727-669-8212
E-mail: rcleary@marukausa.com
Southwest
N. TX, N. LA
Kevin Flanagan
JRP Machinery LLC-North
7801 Mesquite Bend Dr. #112
Irving, TX 75063
972-401-1104
Fax: 972-401-1072
E-mail: kflanagan@jrpmachinery.com
S. TX, S. LA
Mark Mathis
JRP Machinery LLC
1251 Lumpkin Road
Houston, TX 77043
713-365-9500
Fax: 713-365-9515
AR
Larry Curran
Maruka USA Inc.
c/o Lee's Summit, MO
501-328-0002
Fax: 501-328-0003
E-mail: lcurran@marukausa.com
E. KS, W. MO
Gary Lowery
Landon Thompson
Tim Mohr
Maruka U.S.A. Inc.
1210 Northeast Douglas
Lee's Summit, MO 64086
816-524-1811
Fax: 816-524-5444
E-mail: glowery@marukausa.com
OK
Jeff Messegner
Curtis Wiesman
Maruka U.S.A. Inc.
12121 East 51st South #101
Tulsa, OK 74145
918-459-6600
Fax: 918-249-2653
E-mail: glowery@marukausa.com
W. KS
Tim Mohr
Maruka U.S.A. Inc.
4057 North Woodlawn #1
Wichita, KS 67220
316-683-7487
Fax: 316-684-0321
E-mail: tmohr@marukausa.com
Northeast
Bob Nakash
Mori Seiki New Jersey
30 Abeel Rd.
Monroe Township, NJ 08831
609-495-6246
Fax: 609-409-6870
Masa Sasaki
Maruka USA, Inc.
400 Commons Way, Ste. 11
Rockaway, NJ 07866
973-983-1000
Fax: 973-983-8711
Michael Tyler
Tyler Machine Tool Co., Inc.
111 Ledge Rd.
PO Box 396
Seabrook, NH 03874
603-474-7730
Fax: 603-474-7729
Glenn Tyler
Tyler Machine Tool Co., Inc.
17 Jeffrey Dr.
PO Box 1142
South Windsor, CT 06074
860-528-4010
Fax: 860-528-6631
Mike Ahrens
Boldt Machinery, Inc.
4803 Pittsburgh Ave.
Erie, PA 16509
814-833-9836
Fax: 814-836-9522
Mike Ahrens
Boldt Machinery, Inc.
104 Boss Rd.
Mattydale, NY 13211
315-463-5754
Fax: 315-463-6054