LMT-Fette's new twincut feed high
feed milling cutter is designed specifically for the roughing and semi-finishing
of materials used in the die and mold industry. LMT-Fette Introduces Twincut Feed High Feed Face Mill
LMT-Fette's new twincut feed high
feed milling cutter is designed specifically for the roughing and semi-finishing
of materials used in the die and mold industry.
The twincut feed features a three-edge insert design that maximizes chip thinning, resulting in feed rates of up to 400 ipm. In addition, it runs at chip loads up to .125" per tooth. Metal removal rates maximize cubic inches per minute of metal removal.
LMT-Fette's new high feed milling cutter cuts at the bottom of the tool, as opposed to the diameter of the tool. The resulting high axial forces and low radial forces permit it to work at overhangs of 10" or more.
The twincut feed performs face milling, pocketing and 3-D contouring in all steel up to 45Rc, 300 and 400 series stainless steels and grey and ductile cast iron. It also performs well in plunge milling, ramping and helical boring/drilling operations. Coolant-through capabilities improve tool life and chip evacuation.
The twincut feed is designed to work combined with LMT-Fette's new LC280TT grade insert. This grade is a PVD substrate with multilayer coatings of TiA1N and TiN.
For more information contact:
LMT-Fette, Inc.
18013 Cleveland Parkway
Suite 180
Cleveland, OH 44135
800-225-0852
Fax: 216-377-0787
E-mail: lmtfette@lmtfette.com