Makino has announced the newest addition to its
family of 5-axis machining centers, the D500. This new 5-axis vertical machining
center is designed for complex part production where part quality is paramount.
Makino has announced the newest addition to its
family of 5-axis machining centers, the D500. This new 5-axis vertical machining
center is designed for complex part production where part quality is paramount.
"This machine combines the agility of a full 5-axis machining center with the accuracy inherent in every Makino," said Tim Jones, Makino Product Manager. "Add Makino's unmatched applications engineering to the mix, and this is a very powerful offering for any job shop."
The work zone for the D500 is 500 x 450 mm. The X-, Y- and Z-axes provide strokes up to 550 mm, 1,000 mm and 500 mm, respectively. Rotary table axes A and C provide rotational motion of +30 to -120 degrees on the A-axis and a full 360 degrees on the C-axis. The D500 is capable of rapid rates up to 50 m per minute and is equipped with a 14,000 RPM high power spindle. 20,000 RPM and 30,000 RPM core cooled spindles are also available on the D500.
In addition to the D500, Makino offers 5-axis machining centers based on both a vertical machining center and horizontal machining platform, including specialty 5-axis machining centers designed to machine large aerospace structural components.
Direct Drive Rotary Table
Makino utilizes three direct drive motors for the
D500's C-axis rotary table and the A-axis trunnion. One direct drive motor
controls the C-axis motion. Two direct drive motors control motion in the
A-axis, one at each end of the trunnion. The dual motor design provides greater
torque and rigidity. Most importantly, twist and torsion in the trunnion is
eliminated to achieve superior dynamic accuracy, the company said. The
ultra-high torque DD motors also provide superior acceleration characteristics
that can slash cycle time of complex five-axis simultaneous machining
applications by up to 60%, said Makino.
"The D500 axis configuration is unique and provides added performance," said a spokesperson. "The length of the trunnion assembly runs parallel to the X-axis motion only, making the trunnion assembly deflection-free during quick axis motion for greater accuracy than traditional five-axis configurations.
"The machine features roller linear guides across all linear axes for extra rigidity. Y and Z axes are located above the work zone, and the X axis is located in the bed side of the machine. Greater accuracy was achieved with independent axes, in which movement remains uninfluenced by the characteristics of combined axes."
Engineered for Accuracy
"The architecture of the D500 is a 'closed loop'
design that increases overall stiffness and rigidity of the machine structure,"
the spokesperson said. "This means all force impacted points of the machine are
in close proximity to its support structure. Simply put, high stiffness, minimum
over-hang design.
"This new five-axis machine includes Makino's Thermal Stabilizer system that includes core cooled ball screws and heat insulation systems. This system allows for sustainable dynamic accuracy in unstable shop environments. Internal base coolant removes chips from the work zone efficiently where they are evacuated from the machine by a lift-up chip conveyor."
Professional 5 CNC Control
"The D500 incorporates control enhancements to
improve five-axis machining performance and operability," the spokesperson said.
"Tool Center Point Control (TCP) allows programming based on the tool tip so
that tool compensation features can be applied. Further TPC developments improve
the cutter path to achieve greater surface quality. Dedicated user-friendly
screens are developed to simplify the overall application of five-axis
machining. Easy to apply functions are included to prevent interference between
the spindle and trunnion during automatic operation to improve risk-free
production.
"The D500 provides great operator access to the work table for machine interaction and setup purposes, with a ceiling opening to allow easy crane access to the machine. The machine can be easily upgraded for automation. An Automatic Pallet Changer can be added to the machine at any time, and it can be integrated into Makino's MMC2 pallet system that includes Makino a51 400mm horizontal machining centers. Now you can match the machine to the suitable job requirements."
For more information contact:
Mark Rentschler
Makino Inc.
7680 Innovation Way
Mason, OH 45040
800-552-3288
Fax: 513-573-7360
Southwest
TX
Mike Johns
Andy R. Plassenthal
Wesley Davenport
Texas Machinery Company
11875 Forestgate Drive
Dallas, TX 75243
877-477-7340
Fax: 972-231-2815
OK
KOMT
9511 E. 55th Place
Tulsa, OK 74145
918-664-6064
Fax: 918-664-6014
E-mail: Tulsa@komt.com
LA
Clinton Wenzel
c/o Oliver Van Horn Co.
4100 Euphrosine St.
New Orleans, LA 70125
504-210-3040
Fax: 504-822-2449
E-mail: Clinton_Wenzel@jcwenzel.com
NM
Moncktons Machine Tools, Inc.
928 Canvas Back Rd.
Rio Rancho, NM 87144
505-891-8845
Fax: 505-994-3579
E-mail: hmorrismmt@aol.com
AR
Bill Myers
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
256-309-0404
E-mail: bill.myers@singlesourcetech.com
Southeast
NC, SC, VA
Dan Beckman
President
Beckman Precision, Inc.
415 Brookshire Road
Greer, SC 29651
864-801-8181
Fax: 864-801-8180
W. NC & SC
Chris Beckman
Beckman Precision, Inc.
415 Brookshire Road
Greer, SC 29651
877-510-6884
Cell: 864-346-9668
Fax: 864-801-8180
E-mail: cbeckman@beckmanprecision.com
E. VA & Northeast NC
Bob Hodge
Beckman Precision, Inc.
1316 Elmwood Drive
Colonial Heights, VA 23834
804-520-4200
Cell: 804-720-2198
Fax: 804-520-0602
E-mail: bhodge@beckmanprecision.com
E. SC & Southeast NC
Charlie Inderrieden
Beckman Precision, Inc.
396 Blue Stem Drive 58A
Pawleys Island, SC 29585
843-979-0576
Cell: 843-450-5991
Fax: 843-979-0582
E-mail: cinderrieden@beckmanprecision.com
Central NC & VA
Dan Fredrickson
Area Sales Manager
Beckman Precision, Inc.
2936 Motsinger Rd.
Winston-Salem, NC 27107
864-801-8181
Cell: 336-831-4246
Fax: 864-801-8180
E-mail: DFredrickson@beckmanprecision.com
AL, GA, MS, TN
Bill Myers
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
256-309-0404
E-mail: bill.myers@singlesourcetech.com
AL, Upper MS
Jack Nash
Single Source Technologies (SST)
2030 Vestavia Park Lane, Apt. B
Vestavia Hills, AL 35216
205-824-2899
Cell: 205-612-9371
Fax: 205-824-2899
E-mail: jack.nash@singlesourcetech.com
GA
Bud Cowan
Single Source Technologies (SST)
4282 Marci Street
Snellville, GA 30039
770-267-9044
Cell: 678-227-2588
Fax: 770-267-9044
E-mail: bud.cowan@singlesourcetech.com
TN
Hale Reider
Single Source Technologies (SST)
865-250-9344
E-mail: hale.reider@singlesourcetech.com
FL
Bob Arthur
Arthur Machinery, Inc.
5903 Johns Rd.
Tampa, FL 33634
813-887-4455
Fax: 813-887-4456
E-mail: sales@arthurmachinery.com
Northeast
MA, CT, ME, NH, RI, VT
Able Machine Tool Sales
800 Silver St.
Agawam, MA 01001
413-786-4662
Fax: 413-786-5056
E-mail: sales@ablemts.com
NJ, MD, E. PA, Long Island
Automation Solutions, Inc.
2 Hagerty Blvd., Ste 300
West Chester, PA 19382-4956
610-430-3670
Fax: 610-430-3675
E-mail: inquire@asi-pa.com
NY, CT, DE, DC, ME, MD, NJ (EDM)
Single Source Technologies (SST)
30 Chapin Road, Suite 1208
P.O. Box 655
Pine Brook, NJ 07058-0655
800-336-7283
973-227-6601
Fax: 973-227-6605
NY
Meagley Machinery, Inc.
8384 Glen Eagle Dr.
P.O. Box 51
Manlius, NY 13104
315-952-8525
Fax: 315-682-5319
PA, WV
Perseo Erie Machine Sales, Inc.
2230 West 23rd St.
Erie, PA 16506
800-900-9117
Fax: 814-456-8447
E-mail: info@perseoerie.com
NJ
Single Source Technologies (SST)
30 Chapin Road Suite 1208
P.O. Box 655
Pine Brook, NJ 07058-0655
800-336-7283
973-227-6601
Fax: 973-227-6605
Midwest
KY
Technical Equipment Sales
P.O. Box 99793
Louisville, KY 40269
800-852-0582
Fax: 513-874-3340
IN
Technical Equipment Sales
3902 Hanna Circle
Indianapolis, IN 46241
800-852-0582
Fax: 513-874-3340
Technical Equipment Sales
4501 Earhart Lane
Ft. Wayne, IN 46809
800-852-0582
Fax: 513-874-3340
OH
Technical Equipment Sales
10165 International Blvd.
Cincinnati, OH 45246
Phone: 513-874-0160
Toll Free: 800-852-0582
Fax: 513-874-3340
Technical Equipment Sales
8200 Sweet Valley Dr. #106
Valley View, OH 44125
800-852-0582
Fax: 513-874-3340
MI
Single Source Technologies, (SST)
2600 Superior Court
Auburn Hills, MI 48326
248-232-6232
Fax: 248-232-6233
E-mail: ctg@singlesourcetech.com
MN, ND, SD
Productivity, Inc.
15150 25th Ave. N
Minneapolis, MN 55447-1981
763-476-8600
Fax: 763-476-4092
E-mail: productivity@productivity.com
WI
Preston Giles
Single Source Technologies (SST)
W229 N2510 Duplainville Rd. Unit 2
Waukesha, WI 53186
262-960-0844
Fax 262-574-7551
IL
Jeff Martin
Single Source Technologies (SST)
1135 Jansen Farm Dr.
Elgin, IL 60123
874-468-1295
NE
Productivity, Inc.
13435 A Street
Omaha, NE 68144
402-330-2323
Fax: 402-330-6901
Email: prone@productivity.com
IA
Productivity, Inc.
9440 Atlantic Drive SW
Cedar Rapids, IA 52404
319-632-4288
Fax: 319-632-4289
E-mail: proia@productivity.com