Compact Machine for High-Precision Spindle Finishing Developed by ALMCO

"A compact, high-production spindle-finishing machine engineered for highest precision and performance in deburring small gears and machined parts is now available from ALMCO, Inc., the world's only manufacturer of such equipment," said a company spokesperson. "Requiring just 15 square feet of floor space, the new Model S2-30 finishes up to 480 pieces per hour with extreme uniformity and consistency and exact process repeatability. Parts measuring up to 2-1/2 x 3 inches are loaded on one or both of the machine's spindles, either manually or with robotics if desired, and unloaded after a typical 15-second deburring cycle."

"Spindle finishing offers numerous benefits not possible with conventional finishing equipment. Highest precision of parts is attained, and many can be deburred in no other way because of requirements for extreme accuracy. Process repeatability is assured through elementary adjustments of the equipment and simple procedures performed without special operator skills. Complex parts are mounted on the S2-30's air-actuated collets or I.D. expanding collets at the ends of the rotating spindles. The spindles then pivot into the rotating tub, placing the workpieces in a stream of abrasive slurry moving at speeds up to 2,000 feet per minute."

Centrifugal force spins the slurry into a form-fitting "grinding wheel" while slow rotation of the part in the mass assures uniform deburring and finishing of all surfaces. The spindle heads automatically return to the up position at the end of the pre-set time cycle.

For more information contact:

ALMCO

507 West Front Street

Albert Lea, MN 56007

800-521-2740

www.almcoinc.com

Email: almcosls@innovanceinc.com

Southwest

Mike Schofield

Schofield Company

4411 Bluebonnet Dr., Ste. 104

Stafford, TX 77477

281-494-5070

Fax: 281-494-5085

E-mail: Schofieldem@windstream.net